Sony ip camera firmware download update#
Sony ip camera firmware download software#

Update is required Update is not required Turn off the camera, remove the battery pack, reinsert the battery and turn the camera back on.

Sony ip camera firmware download software#

If the current system software version is 4.01 or later, the update is not required.In this case, disconnect the camera from the computer and click Finish. The current version number and updated version number appear on the lower left side of the screen.After confirming that the current software version is 'Ver.4.00 or earlier', click Next.

Check the LCD screen of the camera, then click Next.Sometimes when the camera is connected to the computer with the USB cable, a message prompting you to restart the computer may be displayed.In this case, remove the battery pack from the camera, reboot the computer, and follow the instructions from '2. If the computer has multiple USB terminals, try with the other terminals.Disconnect the USB cable and connect it again.Note: If the computer cannot find the device, the message 'Could not find the camera for this update' is displayed on the computer screen. 'USB Mode' appears on the LCD screen of the camera. Connect the camera to the computer with the supplied USB cable.If a mode other than Mass Storage is selected, please select Mass Storage. Following the instructions in the System Software Updater window, on the camera, select Menu > Setup subpage > USB Connection and check if Mass Storage is selected.Do not connect the camera to the computer yet. Double-click the file that you downloaded.Close all programs currently running on your computer.Click the Desktop tile from the Start screen and find the downloaded file in the Downloads folder by using Explorer. Note for Windows 8.1/10 users: With the standard settings of Internet Explorer, the update file will be saved in your Downloads folder. Save the file to the desktop of your computer (recommended).After reading the disclaimer, click Download.Make sure that you are logged on as a user with administrative rights.Do not connect the camera to other any other devices except your computer.

Prevent your computer from entering Sleep mode.

Remove the memory card from the camera before starting the update process.

Do not remove the battery during the update as the sudden loss of power may render the camera inoperable.

Use a fully charged rechargeable battery pack NP-FW50 or the AC adaptor AC-PW20 (sold separately).